The effect of low oveerall equipment effectiveness (OEE) on working hours and production costs of supplement products
Keywords:
Produk Suplemen, OEE, Biaya ProduksiAbstract
The pharmaceutical industry has strict regulations and procedures to guarantee a quality system by implementing Good Manufacturing Practices (CPOB) or current Good Manufacturing Process (cGMP). This must be adhered to by the pharmaceutical industry to ensure the safety, efficacy and consistent quality of the products produced. To produce consistent quality, the pharmaceutical industry needs to make continuous or ongoing improvements, one of the improvements that must be made is reducing downtime and reducing defective products. These improvements will increase the effectiveness of the machine. One method that can be used is Overall Equipment Effectiveness (OEE). This research aims to determine the effect of OEE values on working hours and production costs (direct labor & factory overhead) of supplement products by looking at the differences between actual and standard. This research uses descriptive quantitative methods followed by qualitative methods to find the root of the problem. Quantitative by calculating the value of availability level, performance level, quality level, OEE value, working hours and production costs (direct labor & factory overhead). Qualitative with Focus Group Discussion (FGD). The primary packaging production process for supplement products in 2022 shows an availability level of 47.23%, a performance level of 82.50%, a quality level of 95.78%, an OEE value of 37.32%. This shows that the condition of packaging machine X is not in prime condition because the overall OEE value is still below the ideal value of 85%. The low OEE value has an impact on working hours and production costs (direct labor & factory overhead) where the T test results show a significant difference between standard and actual (p-value (1.2829x10-6) ≤ α (0.05).
Downloads
References
BPOM, 2018. Pedoman Cara Pembuatan Obat yang Baik (CPOB). Jakarta: Badan Pengawasan Obat dan Makanan.
Kumar, N. dan AjheyaJha, 2016. Quality Metrics and Quality KPI of Pharmaceutical Industry-A Review of Gap in Existing Practices. International Journal of Current Research. Vol. 8, Issue, 01. pp.25285-25288.
Singh, R.K., Clements, E.J., Sonwaney, V., 2018. Measurement of overall equipment effectiveness to improve operational efficiency. Int.J. Process Management and Benchmarking. 8 (2): 246-261.
Arianto, B., Mandagie, K. L., Zulheri, 2021. Analisis Penerapan Total Productive Maintenance dan Kaizen untuk Meningkatkan Overall Equipment Effectiveness pada Line Liquid di PT.PTI. Journal Universitas Suryadarma.
Patel, Chetan, 2017. Improvement in Overall Equipment Effectiveness in Pharmaceutical Company. Thesis. Ahmehabad: Gujarat Technological University.
Theeb, N. A., 2018. Problem Solving and Enhancing the Overall Equipment Effectiveness in Pharmaceutical Industries. International Journal of Health and Medicine. 1(2): 5-8.
Syaputra, M. J., Utomo, U., Rimawan, E., 2020. Analisa kinerja mesin kemas primer dengan metode overall equipment effectiveness (OEE) di sebuah industri farmasi. Journal Industrial Services, 4(2).
SK Gubernur Jawa Barat No. 561.7/Kep.776-kesra/2022 tentang Upah Minimum Provinsi Jawa Barat Tahun 2023
Dewi, N. C., 2016. Analisis Penerapan Total Productive Maintenance (TPM) dengan Perhitungan Overall Equipment Effectiveness (OEE) dan Six Big Losses Mesin Cavitech PT. Essentra Surabaya. Industrial Engineering Journal, 4: (4).
BPOM RI, 2009. Nomor HK.00.05.1.23.3516 tentang Izin Edar Produk Obat, Obat Tradisional, Kosmetik, Suplemen Makanan dan Makanan yang bersumber, mengandung, dari bahan tertentu dan atau mengandung alkohol.
(Triana, Vivi, 2006. Macam-macam vitamin dan fungsinya dalam tubuh manusia. Jurnal Kesehatan Masyarakat. I (I)). Dan WHO, 2004. Vitamin and Mineral requirements in human nutrition (2nd Edition). ISBN 92.)
Vorne, 2015. Six Big Losses (Online). Tersedia: https://www.vorne.com/learn/tools/six-big-losses/six-big-losses-executive-summary.pdf, diakses pada Kamis, 03 November 2022.
Aristriyana, E., Fauzi, R. A., 2022. Analisis Penyebab Kecacatan Produk Dengan Metode Foshbone Diagram dan Failure Mode Effect Analysis (FMEA) pada Perusahaan Elang Mas Sindang Kasih Ciamis. Jurnal Industrial Galuh. 4 (2): 75 – 85.
Pamuji, 2008. Pengukuran Produktivitas Pekerja Sebagai Dasar Perhitungan Upah Kerja Pada Anggaran Biaya(Studi Kasus). Tesis. Sumatera Utara: Universitas Sumatera Utara.
Undang-Undang Republik Indonesia Nomor 13 Tahun 2003 tentang Ketenagakerjaan.
Peraturan Pemerintah Republik Indonesia Nomor 35 Tahun 2021 Tentang Perjanjian Kerja Waktu Tertentu, Alih Daya, Waktu Kerja dan Waktu Istirahat, dan Pemutusan Hubungan Kerja.
Mulyadi. 2010. Sistem Akuntansi, Edisi ke-3, Cetakan ke-5. Penerbit Salemba Empat, Jakarta.
Husni, P., Ekawati, A. Y., 2018. Analisis Overall Equipment Effectiveness (OEE) pada Proses Pengemasan Primer di Industri Farmasi. Farmaka. 16: 1.
Winantari, A.G., Kardoko, H., Mubarok M.F., 2019. Analisis Akar Penyebab Masalah Dalam Meningkatkan Overall Equipmnet Effectiveness (OEE) Mesin Pengisi Krim ke Tube PT. Kimia Farma Plant Watudakon.
Zulheri, Mandagie K. L., Arianto, B., 2021. Analisis Penerapan Total Productive Maintenance dan Kaizen Untuk Meningkatkan Overall Equipment Effectiveness Pada Line Liquid di PT. PTI.
Corrales, L., Lamban, M. P., Korner, M. E. H., Royo, J., 2020. Overall Equipment Effectiveness: Systematic Literature Review and Overview of Different Approaches.
Mwanza, B.G., Mbohwa, C., 2015. Design of a total productive maintenance model for effective implementation: Case study of a chemical manufacturing company.
Saipudin,S., 2019. Analisis perhitungan Overall Equipment Effectiveness (OEE) untuk meningkatkan nilai Efektivitas mesin line 7 pada PT. UPA.
Alamsyah, Firman, 2015. Analisis Akar Penyebab Masalah Dalam Meningkatkan Overall Equipment Effectiveness (OEE) Mesin Stripping Hipack III dan Unimach di PT Promedrahardjo Farmasi Industri, Tesis. Jakarta: Universitas Mercu Buana.
Peraturan Menteri Energi dan Sumber Daya Mineral No. 28, 2016. Tarif Tenaga Listrik Yang Disediakan Oleh PT Perusahan Listrik Negara (Persero).
Setiawan, B., Latif, F. A., Rimawan, E., 2021. Overall Equipment Effectiveness (OEE) Analysis: A Case Study in the PVC Compound Industry. IJIEM (Indonesian Journal of Industrial Engineering & Management). 3 (1): 14-25.
Stefana, E., Cocca, P., 2022. Resource Overall Equipment Cost Loss indicator to assess equipment performance and product cost. International Journal of Productivity and Performance Management.