Microclimate Optimization for Public Open Spaces Using Envi-Met: a Case Study of Simpang Lima Pendopo
Keywords:
Microclimate, Thermal Comfort, Public Open Space, Layered Vegetation, Reflective-Permeable Materials, ENVI-metAbstract
This study analyzes the microclimate conditions of the Simpang Lima Pendopo area and evaluates the effectiveness of three levels of design intervention—20%, 40%, and 60% optimization—in improving the thermal comfort of public open spaces. Simulations using ENVI-met were conducted at 1:00 PM, 3:00 PM, and 5:00 PM to assess air temperature, relative humidity, wind speed, and PMV values. The results indicate that the existing conditions are still influenced by the dominance of hard pavement, minimal vegetation, and limited ventilation, resulting in high thermal discomfort. The 20% intervention has limited local impact, while the 40% scenario begins to improve heat distribution and comfort in pedestrian paths. The 60% scenario proved to be the most effective with a temperature decrease of 3–4°C, stable humidity, improved micro-ventilation, and PMV reaching the “warm–comfortable” category. The combination of three layers of vegetation, reflective-permeable materials, and water elements proved to be able to reduce heat, reduce hotspots, and create even thermal comfort. These findings confirm that large-scale vegetation-based interventions and surface management are effective strategies for improving microclimate quality in tropical urban areas.
Downloads
References
ASHRAE. (2017). ASHRAE Handbook: Fundamentals. American Society of Heating, Refrigerating and Air-Conditioning Engineers.
ASHRAE. (2020). Thermal Environmental Conditions for Human Occupancy (ANSI/ASHRAE Standard 55-2020). American Society of Heating, Refrigerating and Air-Conditioning Engineers. https://www.ashrae.org
Bowler, D., Buyung-Ali, L. M., Knight, T. M., & Pullin, A. S. (2010). Urban greening to cool towns and cities: A systematic review of the empirical evidence. Urban Forestry & Urban Greening, 9(4), 176–186.
Bruse, M. (2020). ENVI-MET 4.0: A Powerful Tool for Urban Climate Simulation. ENVI-Met Software Manual.
Bruse, M., & Fleer, H. (1998). Simulating the Urban Climate with ENVI-MET. Environment and Planning B: Planning and Design, 25(6), 897–910.
Carmona, M., Heath, T., Oc, T., & Tiesdell, S. (2010). Public Places, Urban Spaces: The Dimensions of Urban Design. Architectural Press.
Fanger, P. O. (1970). Thermal Comfort: Analysis and Applications in Environmental Engineering. Danish Technical Press.
Gehl, J. (2010). Cities for People. Island Press.
Gehl, J. (2013). Life Between Buildings: Using Public Space. Island Press.
Givoni, B. (1998). Climate Considerations in Building and Urban Design. Wiley-Interscience.
Givoni, B., Noguchi, M., & Saaroni, H. (2003). Outdoor Comfort Research Issues. Energy and Buildings, 35(1), 77–86.
McPherson, E. G., Nowak, D. J., & Heisler, G. M. (1997). Quantifying urban forest structure, function, and value: The Chicago Urban Forest Climate Project. Journal of Arboriculture, 23(1), 44–55.
Pemerintah Provinsi Sumatera Selatan. (2023, September 25). Gubernur Sumatera Selatan Meresmikan Infrastruktur Jalan Penghubung Antara Kabupaten PALI dan Kabupaten Musi Rawas. Sumselprov.go.id.
Santamouris, M. (2014). Cooling the Cities: A Review of Innovative Technologies and Measures to Mitigate Urban Heat Island Effect. Energy and Buildings, 82, 28–40.
Shashua-Bar, L., & Hoffman, M. E. (2000). Vegetation as a Tool for Enhancing Microclimate in Urban Canyons. Energy and Buildings, 31(3), 221–235.
SNI T-14-1993-037. (1993). Suhu Udara dan Kenyamanan Termal di Ruang Terbuka Publik. Badan Standardisasi Nasional.
Ulrich, R. S. (1983). Aesthetic and Affective Response to Natural Environment. Behavior and
Gunawan, T. (2018). Kajian Kenyamanan Termal Berbasis PMV pada Ruang Publik Perkotaan. Jurnal Arsitektur Tropis, 6(2), 115–124.
Putra, A. (2020). Analisis Kenyamanan Termal Ruang Terbuka Kota Menggunakan ENVI-met. Jurnal Permukiman dan Kota, 12(2), 89–98.
