Redesign Of The Peanut Huller To Increase Productivity
DOI:
https://doi.org/10.58471/esaprom.v1i02.1407Keywords:
productivity, peeler, peanut, energy, designAbstract
The health and safety of workers is very important, especially for home industries such as the peanut peeling industry. During work, workers feel soreness in the back, waist, arms, wrists and elbows. Therefore, it is necessary to do research on this matter. This study aims to increase productivity by redesigning the peanut peeler machine. In redesigning a work facility in the form of a peanut machine, things that need to be considered are the anthropometry of the operator's body size, complaints during work, the time of the peanut peeling process and heart rate during work. To determine the effect between the treatment before and after the design, a comparison test was conducted using the Paired Sample T-Test. The results showed that the standard time in the conditions before the design was 0.102 hours/kg and the standard output was 29.5 kg/hour. Meanwhile, after the design of 0.023 hours/kg and the standard output is 130.5 kg/hour with an increase in standard output of 101 kg/hour. Energy consumption after working in conditions before design is 4.58 Kcal/minute and after design is 3.7 Kcal/minute with a decrease in energy consumption level of 0.88 Kcal/minute.
References
R. Tahapali, R. Djafar, and Y. Djamalu, “MODIFIKASI MESIN PENGUPAS KULIT KACANG TANAH,” J. Teknol. Pertan. Gorontalo, vol. 4, no. 2, 2019, doi: 10.30869/jtpg.v4i2.466.
K. Komariah, G. Masyithoh, and R. P. W. Priswita, “MESIN PEMIPIL JAGUNG DAN PENGUPAS KACANG TANAH UNTUK MENINGKATKAN KAPASITAS ADAPTASI PETANI TERHADAP ANOMALI CUACA DI WONOSARI, GONDANGREJO,” SEMAR (Jurnal Ilmu Pengetahuan, Teknol. dan Seni bagi Masyarakat), vol. 9, no. 1, 2020, doi: 10.20961/semar.v9i1.35249.
E. K. Winata and A. Suryadi, “PERANCANGAN KURSI TUNGGU YANG ERGONOMIS UNTUK LANSIA DENGAN METODE PAHL AND BEITZ PADA KLINIK XYZ SIDOARJO,” JUMINTEN, vol. 1, no. 6, 2020, doi: 10.33005/juminten.v1i6.130.
M. Anwar et al., “Rancang Bangun dan Analisis Mesin Pengupas Kulit Kacang Tanah Tipe Silinder Horizontal,” Agroteknika, vol. 3, no. 2, 2020, doi: 10.32530/agroteknika.v3i2.46.
N. Syafiq and E. N. Hayati, “Perancangan dan Pengembangan Alat Pemotong Styrofoam Semi Otomatis Menggunakan Metode RULA di Desa Kalisar,” Din. Tek., vol. 13, no. 1, 2020.
A. Andrijanto and B. P. Hutapea, “Penentuan Data Anthropometri untuk Perancangan Ulang Produk Dengan Meninjau Interaksi Pengguna Studi Kasus Perancangan Ulang Kursi Roda ISO 7176 Untuk Anak-Anak Tuna Daksa,” J. Integr. Syst., vol. 2, no. 1, 2019, doi: 10.28932/jis.v2i1.1721.
K. Sari and I. Y. Suryaputri, “Hubungan Dukungan Sosial dan Perilaku Terhadap Kegemukan (IMT/U >1sd) pada Remaja di Sekolah di Jakarta Selatan,” Bul. Penelit. Kesehat., vol. 47, no. 1, 2019, doi: 10.22435/bpk.v47i1.252.
E. Y. Yovi, “Status Ergonomi Pekerja Sektor Kehutanan di Indonesia: Kelelahan Fisik-Mental-Sosial, Kepuasan Kerja, Konsep Sumber Bahaya, dan Konsep Biaya Kecelakaan,” J. Ilmu Kehutan., vol. 13, no. 2, 2019, doi: 10.22146/jik.52140.
