Development of real-time cost analysis application for irrigation construction projects using extreme programming methodology

Authors

  • Denny Jean Cross Sihombing Faculty of Engineering, Atma Jaya Catholic University of Indonesia

Keywords:

Real-Time Cost Analysis, Irrigation Construction, Extreme Programming, Construction Projects

Abstract

This research aims to address the challenges of cost management in irrigation construction projects by developing a real-time cost analysis application. Key issues involve information delay, complexity of cost factors, and limitations of traditional development models. The research method consists of three crucial stages: data collection, application development using the Extreme Programming method, and user acceptance analysis. Data was collected through interviews, field observations, and document analyses. The application was developed with features such as budget management, real-time cost monitoring, risk analysis, project team management, and project financial reports. The pilot test involved test scenarios involving active users. The results showed success in managing budgets, real-time cost monitoring, and risk analysis, with a high success rate. The contribution is developing a responsive and adaptive application that meets the needs of irrigation construction projects, overcomes the limitations of traditional development models, and improves the efficiency and responsiveness of project cost management.

Downloads

Download data is not yet available.

References

Abushanab, A., & Alnahhal, W. (2023). Life cycle cost analysis of sustainable reinforced concrete buildings with treated wastewater, recycled concrete aggregates, and fly ash. Results in Engineering, 20. https://doi.org/10.1016/j.rineng.2023.101565

Akhtar, A., Bakhtawar, B., & Akhtar, S. (n.d.). EXTREME PROGRAMMING VS SCRUM: A COMPARISON OF AGILE MODELS. International Journal of Technology, Innovation and Management (IJTIM), 2, 2022. https://doi.org/10.54489/ijtim.v2i1.77

Alami, A., Krancher, O., & Paasivaara, M. (2022). The journey to technical excellence in agile software development. Information and Software Technology, 150. https://doi.org/10.1016/j.infsof.2022.106959

Ali, K., & Hassan Ali, M. I. (2023). Energy and cost analysis of a multiple channel direct contact membrane distillation module: Case study. Case Studies in Chemical and Environmental Engineering, 8. https://doi.org/10.1016/j.cscee.2023.100449

Alzahrani, J. I., & Emsley, M. W. (2013). The impact of contractors ’ attributes on construction project success : A post construction evaluation. JPMA, 31(2), 313–322. https://doi.org/10.1016/j.ijproman.2012.06.006

Barbón, A., Carreira-Fontao, V., Bayón, L., & Silva, C. A. (2023). Optimal design and cost analysis of single-axis tracking photovoltaic power plants. Renewable Energy, 211, 626–646. https://doi.org/10.1016/j.renene.2023.04.110

Choi, J., & Ha, M. (2022). Validation of project management information systems for industrial construction projects. Journal of Asian Architecture and Building Engineering, 21(5), 2046–2057. https://doi.org/10.1080/13467581.2021.1941999

Dingsøyr, T., Nerur, S., Balijepally, V., & Moe, N. B. (2012). A decade of agile methodologies: Towards explaining agile software development. In Journal of Systems and Software (Vol. 85, Issue 6). https://doi.org/10.1016/j.jss.2012.02.033

Fredriksson, A., & Huge-Brodin, M. (2022). Green construction logistics – a multi-actor challenge. Research in Transportation Business and Management, 45(PA), 100830. https://doi.org/10.1016/j.rtbm.2022.100830

Gao, J. (2022). Research on Financial Informatization Construction of Business and Finance Integration. International Journal of Science and Research (IJSR), 11(7), 354–358. https://doi.org/10.21275/sr22704192347

Guo, F., Wang, K., & Cao, E. (2023). A Digital Twin (DT) Framework at Design and Construction Phases. https://www.researchgate.net/publication/371416031

Hasan, R., Ta, A.-, & Razali, R. (2013). Prioritizing Requirements in Agile Development : A Conceptual Framework. Procedia Technology, 11(Iceei), 733–739. https://doi.org/10.1016/j.protcy.2013.12.252

Jato-Espino, D., Castillo-Lopez, E., Rodriguez-Hernandez, J., & Canteras-Jordana, J. C. (2014). A review of application of multi-criteria decision making methods in construction. In Automation in Construction (Vol. 45, pp. 151–162). Elsevier B.V. https://doi.org/10.1016/j.autcon.2014.05.013

Khan, U., Zevenhoven, R., Stougie, L., & Tveit, T. M. (2023). Life cycle cost analysis (LCCA) of Stirling-cycle-based heat pumps vs. conventional boilers. Cleaner Environmental Systems, 8. https://doi.org/10.1016/j.cesys.2022.100105

Lai, Y.-Y., Yeh, L.-H., Chen, P.-F., Sung, P.-H., & Lee, Y.-M. (2016). Management and Recycling of Construction Waste in Taiwan. Procedia Environmental Sciences, 35, 723–730. https://doi.org/10.1016/j.proenv.2016.07.077

Marzouk, M. M. (2011). Automation in Construction ELECTRE III model for value engineering applications. Automation in Construction, 20(5), 596–600. https://doi.org/10.1016/j.autcon.2010.11.026

Mishra, A., & Alzoubi, Y. I. (2023). Structured software development versus agile software development: a comparative analysis. International Journal of System Assurance Engineering and Management. https://doi.org/10.1007/s13198-023-01958-5

Najihi, S., Elhadi, S., Abdelouahid, R. A., & Marzak, A. (2022). Software Testing from an Agile and Traditional view. Procedia Computer Science, 203, 775–782. https://doi.org/10.1016/j.procs.2022.07.116

Nieto-Morote, A., & Ruz-Vila, F. (2012). A fuzzy multi-criteria decision-making model for construction contractor prequalification. Automation in Construction, 25, 8–19. https://doi.org/10.1016/j.autcon.2012.04.004

Pan, N. (2008). Fuzzy AHP approach for selecting the suitable bridge construction method. Automation in Construction, 17(8), 958–965. https://doi.org/10.1016/j.autcon.2008.03.005

Pereiro, X., Cabaleiro, M., Conde, B., & Riveiro, B. (2023). BIM methodology for cost analysis, sustainability, and management of steel structures with reconfigurable joints for industrial structures. Journal of Building Engineering, 77. https://doi.org/10.1016/j.jobe.2023.107443

Santos, R., Cunha, F., Rique, T., Perkusich, M., Almeida, H., Perkusich, A., & Icaro Costa, ´. (n.d.). A Comparative Analysis of Agile Teamwork Quality Instruments in Agile Software Development: A Qualitative Approach. https://doi.org/10.18293/DMSVIVA2023-217

Serrador, P., & Pinto, J. K. (2015). Does Agile work? - A quantitative analysis of agile project success. International Journal of Project Management, 33(5). https://doi.org/10.1016/j.ijproman.2015.01.006

Shrivastava, S. V., & Rathod, U. (2014). Risks in Distributed Agile Development: A Review. Procedia - Social and Behavioral Sciences, 133, 417–424. https://doi.org/10.1016/j.sbspro.2014.04.208

Tøndel, I. A., Cruzes, D. S., Jaatun, M. G., & Sindre, G. (2022). Influencing the security prioritisation of an agile software development project. Computers and Security, 118. https://doi.org/10.1016/j.cose.2022.102744

Van Lancker, L., Saravanan, A., Abu-Bakra, M., Reid, K., Quijano, C., Goyal, S., Rodrigues, I., Lascaratos, G., Trikha, S., Barwood, C., Combe, E., Kulkarni, A., Lim, K. S., & Low, S. (2023). Clinical Outcomes and Cost Analysis of PreserFlo versus Trabeculectomy for Glaucoma Management in the United Kingdom. Ophthalmology Glaucoma, 6(4), 342–357. https://doi.org/10.1016/j.ogla.2022.11.006

Varriale, V., Cammarano, A., Michelino, F., & Caputo, M. (2023). Integrating blockchain, RFID and IoT within a cheese supply chain: A cost analysis. Journal of Industrial Information Integration, 34. https://doi.org/10.1016/j.jii.2023.100486

Zhang, J., Cheng, J. C. P., Chen, W., & Chen, K. (2022). Digital Twins for Construction Sites: Concepts, LoD Definition, and Applications. Journal of Management in Engineering, 38(2). https://doi.org/10.1061/(asce)me.1943-5479.0000948

Downloads

Published

2024-02-09

How to Cite

Sihombing, D. J. C. (2024). Development of real-time cost analysis application for irrigation construction projects using extreme programming methodology . Jurnal Info Sains : Informatika Dan Sains, 14(01), 583–593. Retrieved from https://ejournal.seaninstitute.or.id/index.php/InfoSains/article/view/3882

Most read articles by the same author(s)

1 2 3 4 > >>